English
 |
Smart N
ISO9001, CE
Laboratory, University, Hospital
315x525x570mm
Simplest Operation!
Just four control keys allow for rapid operational readiness to improve user experience.
Everything else is automatically managed by the built-in microprocessor control system.
PIN-coded access to software set points prevents unauthorized changes to operation or system settings.
Rapid Cartridge Replacement!
One,two,three...rapid catridge change due to quick-connection.
Water purification progresses through separate modules, each with quick connects for simple individual replacement.
Streamlined apperance and intelligent structural design with easy-access door means system can be located under bench.
Quick and easy sanitizationa and replacement of consumables reduce maintenance time.
Reliable Work!
Integrated feedwater check.
Good quality feedwater is a basic requirement for the degree of purity of the water produced, as well as for the long service lives of all purification stages.
An additional measuring cell permanently monitors the conductivity of the feedwater. Any exceeding of the limiting value is immediately displayed.
Conductivity measurement!
The high-precision conductivity measuring cells are individually measured out and each value deposited in the system.
The electronics are automatically calibrated and controlled prior to each measurement.
Temperature compensation!
Platinum chip temperature sensors with an accuracy of +/- 0.1° C are used here.
The temperature compensation can be switched off. USP requirements are fulfilled and optimal measurement reliability ensured.
Flexible dispensing!
Remote water dispenser with ergonomical design comforts your water delivery experiences.
The height and direction of dispenser is adjustable for different positions. Action radius is 25cm.
The dispensing pistol can be removed from dispenser arm to expand your working area.
Full recirculation guarantees water quality at point-of-use.
Auto-volume dispense from 100ml to 60 liters and repeat dispensing.
Foot-pedal activation is available to allow hands-free delivery in a clean room, further reducing the possibility of contamination.
Clear information!
The large easy-to-read LCD display affords the user optimal convenience, with indication on:
The temperature in °C.
The temperature-compensated conductivity/resistivity of water.
The operating mode status, such as production, stand-by.
Liquid level in water tank.
Consumable changing reminder.
Water leakage protection!
Water leakage sensor is linked to the microprocessor system to automatically cut off water input and activate alarm in the situation of leakage.
Space saving!
Each Smart series can be optional installed space-savingly under the bench, in a lab table, or mounted directly to the wall(without the need for extra mounting material).
Remote dispenser can be connected to the main system at a distance of 3 meters. You can get water from height adjustable arm, or hand-held dispensing at each point of use.
Simplest Operation!
Just four control keys allow for rapid operational readiness to improve user experience.
Everything else is automatically managed by the built-in microprocessor control system.
PIN-coded access to software set points prevents unauthorized changes to operation or system settings.
Rapid Cartridge Replacement!
One,two,three...rapid catridge change due to quick-connection.
Water purification progresses through separate modules, each with quick connects for simple individual replacement.
Streamlined apperance and intelligent structural design with easy-access door means system can be located under bench.
Quick and easy sanitizationa and replacement of consumables reduce maintenance time.
Reliable Work!
Integrated feedwater check.
Good quality feedwater is a basic requirement for the degree of purity of the water produced, as well as for the long service lives of all purification stages.
An additional measuring cell permanently monitors the conductivity of the feedwater. Any exceeding of the limiting value is immediately displayed.
Conductivity measurement!
The high-precision conductivity measuring cells are individually measured out and each value deposited in the system.
The electronics are automatically calibrated and controlled prior to each measurement.
Temperature compensation!
Platinum chip temperature sensors with an accuracy of +/- 0.1° C are used here.
The temperature compensation can be switched off. USP requirements are fulfilled and optimal measurement reliability ensured.
Flexible dispensing!
Remote water dispenser with ergonomical design comforts your water delivery experiences.
The height and direction of dispenser is adjustable for different positions. Action radius is 25cm.
The dispensing pistol can be removed from dispenser arm to expand your working area.
Full recirculation guarantees water quality at point-of-use.
Auto-volume dispense from 100ml to 60 liters and repeat dispensing.
Foot-pedal activation is available to allow hands-free delivery in a clean room, further reducing the possibility of contamination.
Clear information!
The large easy-to-read LCD display affords the user optimal convenience, with indication on:
The temperature in °C.
The temperature-compensated conductivity/resistivity of water.
The operating mode status, such as production, stand-by.
Liquid level in water tank.
Consumable changing reminder.
Water leakage protection!
Water leakage sensor is linked to the microprocessor system to automatically cut off water input and activate alarm in the situation of leakage.
Space saving!
Each Smart series can be optional installed space-savingly under the bench, in a lab table, or mounted directly to the wall(without the need for extra mounting material).
Remote dispenser can be connected to the main system at a distance of 3 meters. You can get water from height adjustable arm, or hand-held dispensing at each point of use.
